Household/Brewery Water Sampling Procedure - Ward Laboratories Inc.

Water Analysis | Household/Brewery Water Sampling Procedure

Household/Brewery Water Sampling Procedure

Let us test the quality of your household or brewery water. Please follow the instructions below.

Water Sampling Procedure

  1. Use a clean plastic container for submitting your sample. Any clean plastic bottle will work. Bottles can be obtained from the laboratory.
  2. Let water run for five minutes.
  3. Rinse the container several times with water that is being sampled and then fill the sample bottle. Send at least one-half pint of water to be tested.
  4. If it is not possible to send the sample to the lab immediately after collection, refrigerate until it is sent.
  5. Once you’ve sent your sample, your results will be emailed once completed. Turnaround time varies by analysis and season, but most sample results will be sent within 1-3 days of the samples arriving at the lab.  You will receive an invoice with the results, payable by check, credit card or through our online portal.

Ready to submit your water sample?

Download the submittal form and make sure you include your name, address, phone number, sample ID, and desired analysis. Email address is suggested for rapid return on reports.

Order Sampling Supplies | Questions?